Process control system
   Navigation :   Home Our productsProcess control system


Time:2023-07-19 16:20:10 Browser 53 Origin:This station

Product Type: Electromagnetic / Turbine Flowmeter
Nominal caliber: DN15-DN600 (one body type / separate type) multiple choices
Material: WCB/304
Electrode material: Electrode materials: molybdenum-containing stainless steel, Hastelloy B, Hastelloy C, titanium, tantalum, platinum ai alloys, 7 kinds of stainless steel coated with tungsten carbide 
Output signals: bi-directional two-way, fully isolated 0-10mA/4-20 mA, frequency output, pulse output
Supply voltage: single-phase AC 85-265V, 45-63HZ, power less than 20W; DC power supply 11-40VDC
Explosion-proof and anti-corrosion standards: integral / separate type md II BT4/IP67/IP68
Digital communication: RS485, RS232, MODBUS, REMOTE, HART, with anti-surge protector and power loss memory function
Display mode: LCD / integrated / split / Chinese menu
Accuracy level: 0.5%/0.2%
Pressure level: 4.0MPA(DN10-150)/1.6MPA(DN200-600)/1.0MPA(DN700-1200)/0.6MPA(DN1400-2000)
Maximum flow rate: 15m/s
Ambient temperature:-25℃~+60℃
Relative temperature: 5%-95
Working temperature: -40℃~80℃

SEVICON Zhuhai is a national high-tech enterprises, also the national science and technology-based small and medium-sized enterprises. With safe and reliable design and innovative technology, rigorous quality control capabilities, SEVICON provides automation and intelligent fluid control products and after-sales service to customers in China.We aim customer satisfaction as the first priority to supply SEVICON products in a more timely and accurate manner.

SEVICON Zhuhai electromagnetic / turbine flowmeter product description,CLD type electromagnetic flowmeter adopts the contemporary electromagnetic flow new technology manufacturing, see following characteristics.
1.Measurement is not affected by changes in fluid density, viscosity, temperature, pressure and conductivity.
2.No obstruction to the flow of parts in the measuring tube, no pressure loss, lower requirements for straight tube section.
3.The nominal caliber of this series is DN3~DN3000. multiple choices for a wide range of sensor lining and electrode materials.
4.The converter adopts novel excitation method with low power consumption, stable zero point and high accuracy. The flow rate range is up to 1500:1.
5.The converter can be combined with the sensor in a single unit or in a separate unit.
6.The converter adopts 16-bit high-performance microprocessor, 2x 16LCD display, convenient parameter setting, reliable programming.
7.The flow meter is a bi-directional measuring system with three built-in totalizers: positive, reverse total amount and differential total amount. It can display positive and reverse flow and has various outputs including current, pulse, digital communication, HART.
8.The converter adopts surface mount technology (SMT), with self-test and self-diagnostic function.
9.Rubber and polyurethane lined sensors are intrinsically immersed in the structure.
10.Explosion-proof type instruments can be used in relevant explosion-proof places.
11.CLD type electromagnetic flowmeter is used to measure the volume flow of conductive liquids and slurries in closed pipelines, applicable to chemical industry, electric power, metallurgy, mining, petroleum, water supply and drainage, papermaking, medicine, food and other industry.

Next:Digital Pressure and Temperature Gauges
Get in touch
Online customer service

Mobile phone:18666133509、13360606830


Zip Code:519000
Get in touch