SEVICON ELECTRIC ACTUATOR Multi Turn High Torque:
Brand: SEVICON
Model: IK3/ AK3 series
Power supply: AC380V (土5%), single-phase: AC220V (土 5%)
Frequency: 50Hz(土 0.4%)
Ambient relative humidity: ≤95% (25°C)
Altitude: ≤1000m
Ambient temperature: -20°C to +70°C
Protection level: IP 65/66/67
Explosion-proof mark: EX d IIB/IIC T4/T5/T6
Short-time operation motor : rated running time is 10 minutes, F class insulation
Control mode: ON/OFF switch type, RS485/ModBus bus, Bluetooth, intelligent (Local and Remote)
SEVICON multi turn actuator description,
Multi-turn type: operate more than 360 ° to enable the opening and closing of the valve, mainly used for gate valves, globe valves, pipe clamp valves and diaphragm valves;
Multi-turn electric actuators can quickly drive large-sized valves. A limit switch mounted at the end of the valve\'s travel cuts off the power to the motor to protect the valve from damage. Also the torque sensing device cuts off the power supply to the motor when the safety torque is exceeded. The position switch is used to indicate the valve’s on/off status, and the handwheel mechanism with the clutch unit mounted allows the valve to be operated manually in power failure.
Advantages
Easy to access energy
Fast signal transmission speed
Long transmission distance with centralized control
High sensitivity and accuracy
Easy to cooperate with electric regulating instruments
Simple installation and wiring
SEVICON creates first-class products and services for customers to make process control and fluid control more reliable, trustworthy. SEVICON is also a high-end fluid process control integrator, helping domestic customers to modify and design complete sets of solutions for harsh working conditions and maintenance services.
