Time：2024-04-29 11:08:54 Browser 6 Origin：本站
SEVICON Ultra-Pure Y-Type Filter Application in Class 10 Cleanrooms and Structural Features
Zhuhai Sevicon Ke Automation Equipment Co., Ltd. :
SEVICON Ultra-Pure Y-Type Filter Product Introduction:
The SEVICON Y-type filter is a high-performance filtration device widely used in various ultra-pure and cleanroom environments, providing users with an efficient and reliable filtration solution. The Y-type filter is a pipeline system device for transporting media, typically installed at the inlet of equipment such as valves, pressure-reducing valves, pressure-relief valves, and constant water level valves. Its primary function is to remove particulate impurities from the medium to protect the normal operation of equipment and valves. The SEVICON Y-type filter features a simple structure, low resistance, and convenient drainage, making it suitable for a variety of media, including water, oil, and gas.
Main Features of the SEVICON Ultra-Pure Y-Type Filter:
1.Compact structure and easy installation: The SEVICON Y-type filter features a compact design, occupying minimal space, making it convenient to install in various environments.
SEVICON Y-Type Filter Structure:
1.SEVICON Y-Type Filter: Composed of a Y-shaped straight-through body, an internal cylindrical filter mesh, end caps, etc., as shown in Figure .
2. Telescopic Y-Type Filter: Composed of a Y-shaped straight-through body, an internal cylindrical filter mesh, end caps, and a telescopic joint, etc.
Index Description:
1 - Pipe body;
Filter screen;
3 - Plug;
4 - End cover; DN - Nominal size, dimensionless;
L - Structural length of the Y-type filter, in millimeters.
Figure 1 Schematic diagram of the Y-type filter
Pipe body;
2- Filter screen;
3- End plug;
4- End cover;
5- Sealing gland;
6- Expansion joint;
DN- Nominal size, dimensionless;
L- Structural length of the telescopic Y-type filter, in millimeters;
L- Expansion length, in millimeters.
SEVICON Y-Type Filter Structural Length:
1. The structural length and expansion amount shall comply with the provisions of Table 1.
2.The recommended structural length shall be given priority; other structural lengths should be determined in consultation with the customer or according to contract requirements.
3. Structural length deviations shall comply with the provisions of Table 1 in GB/T12221-2005. Table 1 Structural Length and Expansion Amount. 
Technical Requirements for Y-Type Filters:
SEVICON Y-Type Filter Special Coating and Appearance
1. All parts surfaces should be clean and smooth, free of cracks, sand holes, burrs, adherents, and other defects that may affect usage.
2. The ultrapure filtration device should be cleaned with DI water and high-oxygen water to achieve a Class 10 cleanroom standard.
