Instrumentation
   Navigation :   Home Our solutionsInstrumentation

SEVICON Ultra Pure Y-Filter for Cleanroom CLASS 10 and Structural Features

Time:2024-05-07 15:34:36 Browser 46 Origin:This station

SEVICON Ultra Pure Y-Filter for Cleanroom CLASS 10 and Structural Features

Zhuhai SEVICON automation equipment Co. Ltd.

SEVICON Ultra Pure Y-Filter description:

As a high-performance filtration device, SEVICON Y-filter is widely used in all kinds of ultra-purity and cleanroom environments, providing users with efficient and reliable filtration solutions.The Y-filter is a piping system device for transferring medium, usually installed at the inlet end of valves, pressure reducing valves, pressure relief valves, level control valves and other equipment.Its main role is to remove particulate impurities in the medium to protect the normal operation of equipment and valves.
SEVICON Y-filter has the advantages of simple structure, small resistance, convenient drainage, etc. It is applicable to a variety of medium, such as water, oil and gas.

Features of SEVICON Ultra Pure Y-Filter:

1.Compact structure, easy installation: SEVICON Y-filter adopts compact design, which covers a small area, easy  and is to install in various environments.
2.High-efficiency filtration: Y-filter adopts stainless steel double-layer mesh structure with excellent filtration, which can effectively remove particles and impurities in the medium.
3.High-efficiency filtration: Y-filter adopts stainless steel double-layer mesh structure with excellent filtration, which can effectively remove particles and impurities in the medium.
4.Convenient drainage: Easy and convenient operation.
When cleaning SEVICON Y-filter , just take out the detachable cartridge, remove the impurities and re-install it.
5.A wide range of applications: SEVICON Y-filter is suitable for DI water, ultra-pure compressed air, special gas medium and other medium.

Structure of SEVICON Y-filter:

1.SEVICON Y-filter: It consists of a Y-shaped straight-through tube body, a built-in cylindrical strainer, end caps, etc., see Figure 1.
2.Telescopic Y-filter: It consists of a Y-shaped straight-through tube body, built-in cylindrical filter, end cover and telescopic section.

Note: 
1.Tube body;
2.filter
3.plug
4.end cap; DN-nominal size, dimensionless number;The structural length of Y-filter in millimeters.
Figure 1, drawing of Y-filter


Note:
1.Tube body
2-filter
3-plug
4-end cap
5-sealing cap
6-telescopic joints; DN-nominal size, dimensionless
L-The telescopic structural length of Y-filter in millimeters.
L-telescopic in millimeters.

The structural length of SEVICON Y-filter:

1.The length of the structure and the amount of telescoping shall be in accordance with Table 1.
2.Recommended structural lengths are preferred, other structural lengths should be specified in consultation with the customer or as required by the contract.
3.The deviation of structure length should meet the criterion of Table 1 in GB/T12221-2005.
Table 1 Structural Length and telescoping

The technical requirements of Y filter:

Special painting and appearance for SEVICON Y-filter

1.The surface of all parts should be clean and smooth, there should be no cracks, sand holes, burrs, adhesion and other defects affecting the use.

2.After cleaning the ultra-pure filtration device with DI water and high oxygen water, the cleanroom can reach CLASS 10.

Prev:没有了
Next:The application of SOLDO SQ73 Series limit switch box on the ZDHM-150LB-1 Pneumatic Control Valve
Get in touch
Online customer service
Tel:0756-6893618

Mobile phone:18666133509、13360606830

Fax:0756-8930680

Zip Code:519000

Email:sales@autosevicon.com

Website:www.autosevicon.com
Get in touch