The application of SOLDO SQ73 Series limit switch box on the ZDHM-150LB-1 Pneumatic Control Valve

Time：2024-05-19 11:13:33 Browser 648 Origin：This station

Product：ZDHM electrical single seated, globe cage valve

Model：ZDHM ZAZM

Connection：Flange

Structure：Signal base

Actuator：Electrical

Product caliber：DN20-200 (can be customized based on your needs)

Nominal pressure：1.0MPa-6.4 (can be customized based on your needs)

Materials：Cast iron, cast steel, carbon steel, stainless steel,304,316

Tel：0756-6893618

Fax：0756-8930680

Email：Sales@autosevicon.com

sales@sevicon.net

Tencent QQ：1337798268,2906609064

Company：Zhuhai SEVICON Automation Co.,Ltd

Website：www.autosevicon.com, www.sevicon.net

Zhuhai SEVICON Automation Co., Ltd (SEVICON) products:

Production and commissioning of complete sets of products: control valves (pneumatic, electric), switching valves (butterfly valves, ball valves), actuators (pneumatic, electric), control programs (air circuit, circuit).

Agency products: Italy SOLDO limit switch box, the United States FLOWSERVE full series of products, South Korea YTC full series of products, Spain JC valve, Germany P + F series of sensors, Germany MHA high-pressure ball valve agents.

Descriptions for SEVICON ZDHM electric single seated, globe cage valve

Electric single-seat, globe cage control valve, accept the direct current signal from the regulating instrument, changing the flow of the regulated medium, so that the controlled process parameters are maintained at a given value, which is widely used in power, metallurgy, chemical, petroleum, textile, pharmaceutical, paper and other automation control industries. The nominal diameter of this series is from 20 to 200mm and nominal pressure is 1.0, 1.6, 4.0, 6.4MPa. The working temperature ranges from -40 ℃ ~ 450 ℃,with 0 ~ 10mA DC or 4 ~ 20mA DC acceptance signal, which is suitable for electric single-seat regulating valve in low differential pressure and viscous medium or impurities. Electric globe cage regulating valves are suitable for applications with large differential pressure.There are metal-metal and non-metal-metal seals for the sealing part of the valve, the latter one meets the VI class (zero leakage) standard when the valve is closed.There are 2 sealings, one is regular seal and the other is bellows seal. The former is used for general occasions, the latter is for important occasions which require unallowable external leakage. The flow characteristics are linear or equal percentage. There are two types of actuators: general type and electronic type. A wide variety of specifications are available.

Features of SEVICON regulating valve

1. The valve body is designed according to the principles of fluid dynamics with equal cross-section low flow resistance flow path, and the rated flow coefficient is increased by 30%.

2. Large adjustable range, inherent adjustable ratio is 50, flow characteristics in linear and equal percentage.

3. Electrical globe cage regulating valve plug is equipped with upper and lower pressure balanced holes, low unbalanced force, good valve stability, strong interchangeability for globe cage, high operating differential pressure.

4. The regulating cut-off type adopts a soft-seal structure spool, reaching Class VI leakage standard (zero leakage).

5.The servo amplifier utilizes deep dynamic negative feedback, which improves auto-adjustment accuracy.

6. The electric operators are available in various forms for 4~20mA.DC or 0~10mA.DC.

6.The electronic control valve can be directly controlled by the current signal valve opening, without servo amplifier.

7. Bellows-sealed control valves form a complete seal against the moving valve stem to prevent fluid leakage.

Nominal diameter DN (mm) (Seat diameter)		20				25	32	40	50	65	80	100	125	150	200
		10	12	15	20
Rated flow coefficient (Kv)	Linear	1.8	2.8	4.4	6.9	11	17.6	27.5	44	69	110	176	275	440	690
	Equal percentage	1.6	2.5	4	6.3	10	16	25	40	63	100	160	250	400	630
Rated Stroke (mm)		16					25			40			60
Nominal pressure (PNMPa)		1.0 1.6 4.0 6.4
Inherent flow characteristics		Linear, equal percentage
Inherent adjustable ratio		50
Allowable leakage volume	Single seated	Hard seal:Ⅳ Soft seal:Ⅵ
	Globe cage	Hard seal:II Soft seal:Ⅵ
Operating temperature ℃		-20~200 -40~250 -40~450 -60~450
Signal ranges (mA.DC )		0~10 4~20
Action mode		Electro-Off Electro-On
Ambient operating temperature ℃		Electric regulating valves: -20~70 ℃ Servo-amplifier: 0~50℃
Ambient humidity		Electric regulating valves:≤ 95% Servo-amplifier:≤ 85%
supply voltage		220V 50Hz 380V 50Hz 24AC/DC

Materials

Valve body, valve cover: HT200、ZG230-450 ZG1Cr18Ni9Ti

Valve spool: 1Cr18Ni9Ti、Stellite, reinforced PTFE

Filling: PTFE, Expanded graphite

Pushrod bushing: 2Cr13

Plate: asbestos rubber plate, 10, 1Cr18Ni9Ti asbestos spiral plate

Bellows: 1Cr18Ni9Ti

Technical Parameters

The indicators of regulating valve product performance implement GB/T4213-92.

Technical parameters of electric actuators

Nominal diameter DN (mm)		20	25	32	40	50	65	80	100	125	150	200
Electrical actuator	Regular	ZAZ-60 DKZ-310		ZAZ-60 DKZ-310			DKZ-410			DKZ-410 DKZ-510
	Electronic	JHZAZ1		JHZAZ2			JHZAZ3			JHZAZ3
Electric actuator thrusts (N )	Regular	400 4000		400 4000			6400			6400 16000
	Electronic	2000		4000			6000			8000
Full stroke Time (S )	Regular	12.5		20			32			48
	Electronic	30		30			48			60
Power consumption (W )	Regular	28					35
	Electronic	6		15			25			40

The data in the table is only for the regular configuration.

The specific parameters selection can be set according to the user requirements.

External dimensions and weight

Regular Unit: mm

Nominal diameter DN		20	25	32	40	50	65	80	100	125	150	200
A		460					530			630
B		230					230			260
H 1		490					540			625
L		150	160	180	200	230	290	310	350	400	480	600
H 2		175	180	215	218	230	280	285	315	400	460	540
H 3		53	57.5	70	75	82.5	92.5	100	110	125	142.5	170
Weight kg	PN 16 40	50	52	54	56	58	75	87	95	132	135	155
Weight kg	PN64	53	56	58	65	68	84	110	129	177	180	210

Nominal diameter DN		20	25	32	40	50	65	80	100	125	150	200
d		φ 155		φ 162			φ 170
H 4		290		325			380
L		150	160	180	200	230	290	310	350	400	480	600
H 5		175	180	215	218	230	280	285	315	400	460	540
H 6		53	58	70	75	82	92	100	110	125	142	170
Weight kg	PN 16 40	10	12	15	17	18	34	46	54	76	79	100
Weight kg	PN64	13	16	19	26	27	43	69	85	120	125	150

Prev：SEVICON Ultra Pure Y-Filter for Cleanroom CLASS 10 and Structural Features

Next：Technical Applications on SOLDO SQ70 limit switch in SEVICON Z40H manual valve

The application of SOLDO SQ73 Series limit switch box on the ZDHM-150LB-1 Pneumatic Control Valve

Online customer service